2.0*12.1 Pogo Pin Connector Gold Plated DIP Spring Loaded Contact
Magnet Pogo Pin
Pogo-pin contacts consist of three primary parts: pins, tubes, and
springs. The spring-loaded design provides constant lateral
pressure against the inside of the tube, which results in steadier
connections with better contact resistance than standard
connectors.
Pogo-pin connectors feature a floating contact design that allows
them to rotate and slide freely within the housing to provide the
range of movement required. They also eliminate the need for
soldering, which significantly decreases assembly time and cost,
and have easily detachable spring pins to help maximize design
flexibility. In addition, they are often electroplated with gold
over nickel to achieve the high electrical conductivity, increased
durability, and corrosion resisistant performance required for use
in critical clinical equipment.
| Custom DIP Spring Loaded Contact Pogo Pin For PCB Mount Pin
Connector |
| stainless steel, Brass, Aluminum, Etc. |
| Zinc / Nickel / Copper Plating, Powder Coating, Etc. |
| Nonstandard or OEM |
| 100pcs |
| PE bag inside, carton outside or per our customers needs |
Characteristics:
1. Female pogo pin connector, male pogo pin connector,
2. Free samples with high class precision, 0.01mm precision
3. High recycling, Large Current ,Low MOQ, Low-Resistance
4. Standard & Non-Standard Pogo pin connector
5. OEM / ODM , Can be custom Designed
6. One Row, two rows, three rows
7. Surface Mount Soldering, Double Head, Flat Head
8. Waterproof
| Structure | Ball beads structure | Sloping structure | Perforated structure | Claw structure |
|---|
| Contact impedance | ≤ 10mΩ | ≤ 30mΩ | ≤ 50mΩ | ≤ 5mΩ |
| Long service time | 10000+ | 10000+ | 10000+ | 500+ |
| Recommended working current | 10A max | 10A max | 10A max | 10A max |
| Main application areas | Mainly used for charging and condition with certain requirements
for vibration and shock | Mainly used for charging or signal transmission of Consumer
electronics | Mainly used for signal transmission or grounding antenna,etc. | Mainly used high-frequency,anti-instantaneous,the situation which
high-reliability is required,such as base stations,military
industries,vehicles. |
| Remarks | The beads increase the internal contacts,the contact is more
stable,and the more needle space is required | The most commonly used structure on the market | The space is smaller,but the contact is not stable,the current is
easy to run through the spring,and it is not recommended for
charging | The needle and the needle tube have multiple contacts to increase
the contact stability |
How to place the order
* You send us drawing or sample
* We carry through project assessment
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30%
deposit
* We start to make the product
* When the goods is done, we take photoes for your check and you
then pay the balance
* We deliver the products to courier company
